Current Audio SB80 Wartungshandbuch PDF herunterladen (Seite 9)

9

Industrial stations

Industrial stations

LBB 7089/21

Industrial single call station

LBB 7089/22

Industrial dual call station

LBB 7089/24

Industrial call station,

4 buttons

LBB 7089/26

Industrial call station,

6 buttons

The industrial single call station is

designed for quick single key access to one

pre-determined station in any M100 S sys-

tem. Ideal for use at doors, gates or in lifts.

The station is delivered as a flush mount

unit with die-cast zink alloy front lac-

quered in light grey. It has a built-in direc-

tory list and splash-proof front for light

industrial environments where there is a

requirement for flush or on wall mount-

ing, the latter with an optional on wall

back box.

The station can be used in connection

with a CCTV camera system for remote

observation.

Kits are available for increased audio out-

put and/or remote door opening.

Kits must be powered separately.

In operation the station allows for loud-

speaking and handsfree conversation.

Outgoing calls are made to one pre-pro-

grammed location by pressing the call

button.

If the call is in indirect mode it has to be

accepted by the receiver before normal

duplex conversation can be established.

If an outgoing call is not answered within

a pre-programmed time-frame, the call will

automatically be reset. Any station in the

system can reach the single call station by

dialling the stations extension number.

The industrial dual call station is identical

to the industrial single call station but

equipped with 2 call buttons and a call

cancel button.

The industrial dual call station has access

to 2 pre-programmed locations.

If a call is not answered within a pre-pro-

grammed time-frame the station will auto-

matically be reset.

Technical data: LBB 7089/21/22/24/26

Dimensions (wxhxd) in mm/inch: 130x265x75/5.1x10.4x3

Weight, net, in kg/lb: 1.4/3

Environmental conditions, category: T1

IP code: 54/65 when properly sealed

Approval: CE

Supply voltage : 36 V d.c. .

At the station, idle <10 V d.c. .

At the station, in operation 18 - 36 V d.c. .

Current consumption

At the station, idle <0.3 mA

At the station, in operation 25 - 38 mA

Output power (continuous/peak): 90/300 mW

Cabling:

Extension line 2-wire

The station is identical to the industrial

single call station but equipped with 4 call

buttons and a call cancel button.

The 4 call buttons give access to four dif-

ferent pre-programmed locations.

Identical to the industrial single call sta-

tion but equipped with 6 call buttons and

a call cancel button.

The 6 call buttons give access to six differ-

ent pre-programmed locations.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 69 70

Kommentare zu diesen Handbüchern

Keine Kommentare