Current Audio SB80 Wartungshandbuch PDF herunterladen (Seite 33)

The M100 S-16 Exchange provides as standard

all the practical problem-solving solutions

described below.

Two-way handsfree conversation

Keying an extension number provides instant

loudspeaking communication between two par-

ties.

Two-way private conversation

As an option the M100 station may be

equipped with a handset to allow privacy or for

ease of conversation in environments with

extreme noise.

Indirect call

The caller may, for privacy reasons, place an

indirect call which has to be accepted by the

called party.

Simplex conversation

Conversation may be manually controlled from

any master station by push-to-talk, release-to-lis-

ten operation of the SIMP button.

Microphone blocking

The microphone can be blocked during conver-

sation by pressing the SIMP button. This places

the station in listen mode.

Automatic line release

Incomplete dialling or calls to non-existent

numbers or shorted lines will release number-

unobtainable signal and be reset.

Automatic queuing

If both channels should be busy a call will enter

queuing for up to 30 seconds and be automati-

cally set up as soon as a speech channel

becomes free.

Wait-on-busy

Calls to a busy station will be automatically

connected if the busy station becomes free with-

in 30 seconds.

Break-in

Enables a caller with an urgent message to inter-

rupt an existing conversation.

The other party will be placed in hold hearing a

hold signal during the break-in conversation.

Call-me

If the called subscriber is not present the caller

may leave a call-me information indicated by a

flashing lamp. When the subscriber returns,

the call is established by keying a code.

Automatic transfer (patch option)

Subscribers may instruct the system to transfer

all incoming calls to any other station.

Follow me

Subscribers may instruct the system to transfer

all incoming calls to the extension where they

are presently located.

Consult call

During a normal two-way conversation a third

party may be called for consultation, leaving the

other party in hold.

Call transfer

A call may be transferred to a third party.

Add-in conference

A conference may be set up between any num-

ber of subscribers.

The conference will be in simplex mode.

Individual subscribers may withdraw from the

conference.

Secretarial filter and transfer

A predefined executive station may route all

incoming calls to a secretary for filtering.

One executive/secretary pair is available in

M100 S-16, two in M100 S-32.

Group call

Enables a one-way announcement to be given

to predetermined groups of stations.

Three groups are predefined.

All call

Enables a one-way announcement to be given

to all extensions, i.e. for voice paging.

Emergency call

Enables a one-way emergency announcement to

all extensions with priority over all other calls.

A special emergency call tone is provided for

distinction from normal calls.

Public Address access

The M100 system may be linked to one or

more P.A. system(s) for making P.A. announce-

ments from any M100 station.

The link is provided by a P.A. coupler which

can be connected to any of the S-16/32 lines.

Programme distribution

Each subscriber with a master station may listen

to a distributed programme. Programme distri-

bution will not interfere with normal use of the

intercom system. The programme will be muted

during calls. The programme source is connect-

ed directly to the programme input socket of

the M100 S-16.

Priority station

The system can be factory-configured to include

a special line for one priority station. Calls

from this station will overrule any other call in

the system.

Display function

Display stations may be used for call identific-

ation purposes. Calls can be identified either

by language, independent symbols or by

alphanumeric display text depending on the

exchange program. Note that text must be pro-

grammed by YOUR LOCAL PHILIPS

DEALER.

Gate/door control

The M100 system provides secure control of

entrance gates or doors.

Door stations provide single button calls to one

or two predetermined locations, whereupon the

door may be opened by pressing a button

during the conversation. Calls from the door

stations may be automatically transferred to any

master station, e.g. for night position.

Two lines are predefined for door operation in

S-16 and four in S-32. Any M100 S single or

dual call station may be used as a door station.

For defining more than two lines for door

operation, special substation programs are avail-

able. By using M100 display stations call iden-

tification can be obtained thereby identifying

which door or gate is calling before answering.

Function flexibility

The extensive M100 product range

contains functions and accessories

for a large number of problem-

solving solutions.

For specific requirements YOUR

LOCAL PHILIPS DEALER has a

PC program for changing certain

parameters in the exchange.

Accordingly, some of the functions

can be adapted to special needs be-

fore delivery. This application is de-

scribed in the software section of

this catalogue.

Function description

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 69 70

Kommentare zu diesen Handbüchern

Keine Kommentare

Current Audio SB80 Wartungshandbuch Seite 33

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Soundbar-Lautsprecher Current Audio SB80